Does NVIDIA GeForce RTX 4060 (reference spec) work with Corsair RM650 (CP-9020280)?
Works with these requirementsSystem-power recommendation and GPU connectors
Why this works
Yes, with the card's included adapter. Corsair RM650 (CP-9020280) is rated at 650 W. NVIDIA gives 550 W as the required system power for NVIDIA GeForce RTX 4060 (reference spec).
- The card needs 1 × 16-pin power connector. This unit has no native 16-pin cable, so use the adapter that comes with the card: it takes 1 8-pin PCIe connector, and this unit has 2.
Already own both? If your setup meets the requirements below, you can use it without buying a replacement.
Check requirements and buying optionsRequirements and limits
- What you need
- Check your setup
- The adapter included with the card and 1 8-pin PCIe connector from the power supply.
- Power supply
- Check your setup
- 650 W, ATX 2.x
- The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
- This is NVIDIA's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
- Card maker: 1x PCIe 8-pin cables (adapter in box) OR 300 W or greater PCIe Gen 5 cable
- Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
Where to buy
Corsair RM650 (CP-9020280)
Before you buy
- The adapter included with the card and 1 8-pin PCIe connector from the power supply.
- 650 W, ATX 2.x
- The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
- This is NVIDIA's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
- Card maker: 1x PCIe 8-pin cables (adapter in box) OR 300 W or greater PCIe Gen 5 cable
- Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
- The card needs 1 × 16-pin power connector. This unit has no native 16-pin cable, so use the adapter that comes with the card: it takes 1 8-pin PCIe connector, and this unit has 2.
- Connect every 8-pin lead of the adapter to its own PCIe connector, then the adapter to the card.
- Check the case clearance and the motherboard slot separately.
We may earn a commission if you buy through a paid link.
Search Amazon for this model (paid link)
Amazon.com search results. Match the model and revision before buying.
Sources
Comparison of manufacturer specifications
Last checked
Power supply
650 W
Card maker asks for
550 W (required system power)
Card power connector
1 × 16-pin power connector
Setup notes
- Connect every 8-pin lead of the adapter to its own PCIe connector, then the adapter to the card.
- Check the case clearance and the motherboard slot separately.
Related pairings
More on Corsair RM650 (CP-9020280)
- AMD Radeon RX 7600 (reference spec)View answer
- Intel Arc A770 Graphics (16GB) Limited EditionView answer
- AMD Radeon RX 9060 XT (16GB) (reference spec)View answer
- NVIDIA GeForce RTX 4060 Ti Founders EditionView answer
More with NVIDIA GeForce RTX 4060 (reference spec)
- Cooler Master MWE Gold 750 V2 Full ModularView answer
- MSI PRO Z690-A DDR4View answer
- NZXT C850 Gold CoreView answer
- ASUS ROG STRIX X870-A GAMING WIFIView answer
Community test reports
No approved reports yet. Queue one and it stays off the page until review.