Skip to content
CompatWiki
My gear

Does Elgato Cam Link 4K work with Dell XPS 15 9530?

Why this works

Elgato Cam Link 4K: USB 3.x HDMI capture, Windows 10 64-bit+, 8th-generation Intel Core (8xxxx) or comparable. Appears as a UVC webcam. Unencrypted HDMI cameras only. Thunderbolt 4 / USB-C 10Gb/s meets USB 3.x; use the A-to-C extension.

Read the evidence (2)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Connection
Check your setup
Cam Link 4K is a USB-A 3.0 stick; use the included 30 cm USB 3.0 A-to-C extension into a USB-C 3.x host port. HDMI cable for the camera is sold separately. USB 2 will not run 4K. Unencrypted HDMI only.
Operating system
Check your setup
Windows 10 64-bit or later. Camera Hub / UVC.
Firmware
Check your setup
Camera Hub current.
  • HDCP / console HDMI is unsupported.
  • USB 2 will not do 4K.
  • 4K60 MJPG is revision- and camera-dependent.

Where to buy

Dell XPS 15 9530

Before you buy

  • Cam Link 4K is a USB-A 3.0 stick; use the included 30 cm USB 3.0 A-to-C extension into a USB-C 3.x host port. HDMI cable for the camera is sold separately. USB 2 will not run 4K. Unencrypted HDMI only.
  • Windows 10 64-bit or later. Camera Hub / UVC.
  • Camera Hub current.
  • HDCP / console HDMI is unsupported.
  • USB 2 will not do 4K.
  • 4K60 MJPG is revision- and camera-dependent.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own Dell XPS 15 9530? Check Elgato Cam Link 4K

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    UVC capture up to 4K30 (4K60 MJPG on supported rev/camera)

  • Required Cable

    USB 3.x A-to-C + HDMI

  • Power Delivery

    Bus-powered

Setup notes

  1. USB 3.x port. HDMI camera → Cam Link. Select the UVC device in the conferencing app.

Community test reports

No approved reports yet. Queue one and it stays off the page until review.