Skip to content
CompatWiki
My gear

Does AMD Radeon RX 7900 XT (reference spec) work with Fractal Design Ion 3 Gold 750W?

Why this works

Yes. Fractal Design Ion 3 Gold 750W is rated at 750 W. AMD gives 750 W as the minimum PSU recommendation for AMD Radeon RX 7900 XT (reference spec).

  • The card needs 2 × 8-pin power connectors, and this unit has 3 6+2-pin PCIe connectors.
Read the evidence (2)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

What you need
Check your setup
The power cable that comes with the power supply.
Power supply
Check your setup
750 W, ATX 3.1
  • The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
  • This is AMD's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
  • Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.

Where to buy

AMD Radeon RX 7900 XT (reference spec)

Before you buy

  • The power cable that comes with the power supply.
  • 750 W, ATX 3.1
  • The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
  • This is AMD's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
  • Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
Already own AMD Radeon RX 7900 XT (reference spec)? Check Fractal Design Ion 3 Gold 750W

Sources

Comparison of manufacturer specifications

Last checked

  • Power supply

    750 W

  • Card maker asks for

    750 W (minimum PSU recommendation)

  • Card power connector

    2 × 8-pin power connectors

Setup notes

  1. Connect the power supply's cable to the card and push it in until it is fully seated.
  2. Check the case clearance and the motherboard slot separately.

Community test reports

No approved reports yet. Queue one and it stays off the page until review.