Skip to content
CompatWiki

Does CalDigit TS4 (Thunderbolt Station 4) work with Framework Laptop 13 (Intel Core Ultra Series 1)?

Works with the host’s built-in ports and drivers. Follow the cable and power notes; no extra driver stack.

Source research · Sources reviewed Nov 16, 2026. This verdict is based on documentation, not a CompatWiki hands-on test. 0 approved community submissions below.

  • Documented Function

    2× 4K@60Hz

  • Connection

    Thunderbolt 4 (included)

  • Power / Charging

    98W

  • Evidence

    Source research

Exact setup & gotchas

Cable
Included Thunderbolt 4 cable into a Thunderbolt 4 expansion card, not a USB-A or HDMI expansion card.
OS
Windows 10 (20H2) or later (CalDigit). Framework ships Windows 11 on prebuilt Intel Ultra systems.
Firmware
Keep Intel Thunderbolt / USB4 firmware and Framework BIOS current. Optional TS4 firmware from CalDigit.
  1. Fit a Thunderbolt 4 expansion card in the bay you will dock to (all four Intel Ultra bays are TB4).
  2. Power the TS4, connect the TB4 cable, and approve the Thunderbolt device in Windows if prompted.
  3. Attach displays to DisplayPort 1.4 and/or downstream Thunderbolt 4. CalDigit: Windows Thunderbolt 3/4 PCs can run dual displays; some Windows TB3 vendors limit that — this Intel Ultra host is TB4.
  4. Check Device Manager: Windows 11 Software Connection Manager may label Thunderbolt docks as USB4. That is the same class of behavior Dell documents on WD22TB4, not a failed TB4 link by itself.
  • Expansion-card choice matters: HDMI or USB-A cards are not the TB4 path.
  • Linux is used on many Frameworks; CalDigit’s published OS list for TS4 is macOS and Windows. Treat Linux as unverified here rather than claiming it.

Sources

Community reports

No approved community reports yet. Submissions appear only after moderation.