Skip to content
CompatWiki
My gear

Does BenQ PD3225U work with HP EliteBook 1040 G11?

Why this works

Connect HP EliteBook 1040 G11's Thunderbolt 4 port to the BenQ PD3225U's Thunderbolt 3 upstream port: one cable carries the picture, charging and USB data.

  • The monitor's native mode is 3840×2160 at 60 Hz.
  • The monitor supplies up to 85 W. HP EliteBook 1040 G11 ships with an adapter of up to 100 W, depending on configuration, so it charges below its full rate from the monitor.
Read the evidence (3)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Connection
Check your setup
Thunderbolt cable (BenQ lists in the box: Thunderbolt 4 1 m).
Operating system
Check your setup
Windows 11.
  • 85 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Where to buy

BenQ PD3225U

Before you buy

  • Thunderbolt cable (BenQ lists in the box: Thunderbolt 4 1 m).
  • Windows 11.
  • 85 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
  • The monitor's native mode is 3840×2160 at 60 Hz.
  • The monitor supplies up to 85 W. HP EliteBook 1040 G11 ships with an adapter of up to 100 W, depending on configuration, so it charges below its full rate from the monitor.
  • Plug the cable into a Thunderbolt 4 port on HP EliteBook 1040 G11 and into the BenQ PD3225U's Thunderbolt 3 upstream port.
  • Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  • Keep the laptop's own adapter nearby for heavy workloads.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own BenQ PD3225U? Check HP EliteBook 1040 G11

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    Up to 3840×2160@60Hz

  • Required Cable

    Thunderbolt

  • Power Delivery

    85W

Setup notes

  1. Plug the cable into a Thunderbolt 4 port on HP EliteBook 1040 G11 and into the BenQ PD3225U's Thunderbolt 3 upstream port.
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  3. Keep the laptop's own adapter nearby for heavy workloads.

Community test reports

No approved reports yet. Queue one and it stays off the page until review.