Does Dell UltraSharp U2723QE work with HP EliteBook 1040 G11?
Works with these requirementsDisplay connection and output
Why this works
Connect HP EliteBook 1040 G11's Thunderbolt 4 port to the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.
- The monitor's native mode is 3840×2160 at 60 Hz.
- The monitor supplies up to 90 W. HP EliteBook 1040 G11 ships with an adapter of up to 100 W, depending on configuration, so it charges below its full rate from the monitor.
Already own both? If your setup meets the requirements below, you can use it without buying a replacement.
Check requirements and buying optionsRequirements and limits
- Connection
- Check your setup
- Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
- Operating system
- Check your setup
- Windows 11.
- 90 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
- Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
Where to buy
HP EliteBook 1040 G11
Before you buy
- Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
- Windows 11.
- 90 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
- Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
- The monitor's native mode is 3840×2160 at 60 Hz.
- The monitor supplies up to 90 W. HP EliteBook 1040 G11 ships with an adapter of up to 100 W, depending on configuration, so it charges below its full rate from the monitor.
- Plug the cable into a Thunderbolt 4 port on HP EliteBook 1040 G11 and into the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode).
- Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
- Keep the laptop's own adapter nearby for heavy workloads.
We may earn a commission if you buy through a paid link.
Search Amazon for this model (paid link)
Amazon.com search results. Match the model and revision before buying.
Sources
Manufacturer or platform documentation
Last checked
Max Output
Up to 3840×2160@60Hz
Required Cable
USB-C DP Alt Mode
Power Delivery
90W
Setup notes
- Plug the cable into a Thunderbolt 4 port on HP EliteBook 1040 G11 and into the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode).
- Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
- Keep the laptop's own adapter nearby for heavy workloads.
Related pairings
More on HP EliteBook 1040 G11
- LG 27UN850-WView answer
- BenQ PD2725U (27-inch 4K Thunderbolt 3)View answer
- ASUS ProArt Display PA279CRVView answer
- LG 32UN880-B UltraFine Ergo (32-inch 4K)View answer
More with Dell UltraSharp U2723QE
- Framework Laptop 13 (Intel Core Ultra Series 1)View answer
- Framework Laptop 13 (AMD Ryzen 7040 Series)View answer
- MacBook Air (M1, 2020)View answer
- MacBook Air (M2, 2022)View answer
Community test reports
No approved reports yet. Queue one and it stays off the page until review.