Skip to content
CompatWiki
My gear

Does ASUS ProArt Display 5K PA27JCV work with Mac Studio (2025, M3 Ultra)?

Why this works

Connect Mac Studio (2025, M3 Ultra)'s Thunderbolt 5 port to the ASUS ProArt Display 5K PA27JCV's USB-C port (DisplayPort Alt Mode): one cable carries the picture and USB data.

  • The monitor's native mode is 5120×2880 at 60 Hz.
  • Mac Studio (2025, M3 Ultra) has its own power supply, so the monitor's power delivery is not used.
Read the evidence (2)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Cable
Check your setup
Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
OS
Check your setup
macOS.
  • 5120×2880 at 60 Hz is more than 4K at 60 Hz. Whether you reach it also depends on the computer's own external-display limit; check Mac Studio (2025, M3 Ultra)'s display specification.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Where to buy

ASUS ProArt Display 5K PA27JCV

Before you buy

  • Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
  • macOS.
  • 5120×2880 at 60 Hz is more than 4K at 60 Hz. Whether you reach it also depends on the computer's own external-display limit; check Mac Studio (2025, M3 Ultra)'s display specification.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own ASUS ProArt Display 5K PA27JCV? Check Mac Studio (2025, M3 Ultra)

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    Up to 5120×2880@60Hz

  • Required Cable

    USB-C DP Alt Mode

  • Power Delivery

    Not used

Setup notes

  1. Plug the cable into a Thunderbolt 5 port on Mac Studio (2025, M3 Ultra) and into the ASUS ProArt Display 5K PA27JCV's USB-C port (DisplayPort Alt Mode).
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.

More on Mac Studio (2025, M3 Ultra)

More with ASUS ProArt Display 5K PA27JCV

Community test reports

No approved reports yet. Queue one and it stays off the page until review.