Instant verdict
Does CalDigit TS3 Plus work with MacBook Air (M1, 2020)?
Some features work as expected; others are limited by the host (video tunnels, Ethernet, display count, or Thunderbolt-only ports).
Source research · Sources reviewed Nov 16, 2026. This verdict is based on documentation, not a CompatWiki hands-on test. 0 approved community submissions below.
- TS3 Plus is Thunderbolt 3. Use the included 40Gb/s Thunderbolt 3 cable (CalDigit: 100W-capable) in a Thunderbolt / USB 4 port — not a USB-C 10Gbps or charge-only cable.
- CalDigit: M1/M2 Macs support one external display through the TS3 Plus; dual 4K@60Hz needs two host DisplayPort streams (M1 Pro/Max or Intel).
- 87W host charging exceeds the M1 Air’s 30W brick. macOS 10.12 is the dock floor.
Documented Function
1× display
Connection
Thunderbolt 3 (included)
Power / Charging
87W
Evidence
Source research
Exact setup & gotchas
- Cable
- Supplied Thunderbolt 3 cable or a certified 40Gb/s Thunderbolt 3 cable. CalDigit: not compatible with USB-C-only computers.
- OS
- macOS 10.12 or later.
- Sources reviewed
- Nov 16, 2026
- Power the TS3 Plus, then connect the Thunderbolt 3 host cable (blue LED when linked).
- Connect one display to DisplayPort 1.2 or the spare Thunderbolt 3 port. USB-C ports on the dock are data-only.
- For HDMI/DVI/VGA, CalDigit requires an active DisplayPort adapter, not a passive dongle.
- A second monitor on DP plus spare TB3 still will not extend on base M1 — host stream limit.
- Do not plug a display into the TS3 Plus USB-C data ports.
Sources
Community reports
No approved community reports yet. Submissions appear only after moderation.