Skip to content
CompatWiki
My gear

Does Anker Charger (140W, 4-Port, PD 3.1, A2697/B2697) work with MacBook Pro 16-inch (M5 Pro, 2026)?

Why this works

This 16-inch MacBook Pro USB-C PD class is 140W. Anker 140W A2697 C1/C2 are 28V/5A 140W EPR — that covers the 140W brick if an EPR cable is used.

Read the evidence (2)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Connection
Check your setup
USB-C to C (EPR / PD 3.1) into a Mac USB-C / Thunderbolt port from A2697 C1 or C2.
Operating system
Check your setup
macOS.
  • Anker 140W 4-Port A2697 live PDO: 3× USB-C + 1× USB-A. C1/C2 9V/3A, 15V/3A, 20V/5A, 28V/5A (140W max). C3 40W. A1 5V/3A, 9V/2A, 12V/1.5A, 10V/2.25A, 11V/3A (33W). Four-port marketing 134W. E-Marker required above 100W. Distinct from 717 140W A2341 (1C) and Prime 160W A2687.
  • EPR cable required for 140W. 5A E-Marker is 100W.
  • This is charge, not video.
  • C3 is 40W — do not use C3 as the 140W Mac brick.

Where to buy

Anker Charger (140W, 4-Port, PD 3.1, A2697/B2697)

Before you buy

  • USB-C to C (EPR / PD 3.1) into a Mac USB-C / Thunderbolt port from A2697 C1 or C2.
  • macOS.
  • Anker 140W 4-Port A2697 live PDO: 3× USB-C + 1× USB-A. C1/C2 9V/3A, 15V/3A, 20V/5A, 28V/5A (140W max). C3 40W. A1 5V/3A, 9V/2A, 12V/1.5A, 10V/2.25A, 11V/3A (33W). Four-port marketing 134W. E-Marker required above 100W. Distinct from 717 140W A2341 (1C) and Prime 160W A2687.
  • EPR cable required for 140W. 5A E-Marker is 100W.
  • This is charge, not video.
  • C3 is 40W — do not use C3 as the 140W Mac brick.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own Anker Charger (140W, 4-Port, PD 3.1, A2697/B2697)? Check MacBook Pro 16-inch (M5 Pro, 2026)

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    None

  • Required Cable

    USB-C PD EPR

  • Power Delivery

    USB-C PD 140W EPR C1/C2

Setup notes

  1. USB-C into the Mac from C1 or C2.
  2. Use an EPR cable for the 140W table — 5A cables cap at 100W on the display.

More on MacBook Pro 16-inch (M5 Pro, 2026)

More with Anker Charger (140W, 4-Port, PD 3.1, A2697/B2697)

Community test reports

No approved reports yet. Queue one and it stays off the page until review.