Skip to content
CompatWiki
My gear

Does BenQ GW2790QT work with MacBook Pro 16-inch (M5 Pro, 2026)?

Why this works

Connect MacBook Pro 16-inch (M5 Pro, 2026)'s Thunderbolt 5 port to the BenQ GW2790QT's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.

  • The monitor's native mode is 2560×1440 at 75 Hz.
  • The monitor supplies up to 65 W. MacBook Pro 16-inch (M5 Pro, 2026) ships with a 140 W adapter, so it charges below its full rate from the monitor.
Read the evidence (2)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Connection
Check your setup
Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
Operating system
Check your setup
macOS.
  • 65 W against 140 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Where to buy

BenQ GW2790QT

Before you buy

  • Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
  • macOS.
  • 65 W against 140 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
  • The monitor's native mode is 2560×1440 at 75 Hz.
  • The monitor supplies up to 65 W. MacBook Pro 16-inch (M5 Pro, 2026) ships with a 140 W adapter, so it charges below its full rate from the monitor.
  • Plug the cable into a Thunderbolt 5 port on MacBook Pro 16-inch (M5 Pro, 2026) and into the BenQ GW2790QT's USB-C port (DisplayPort Alt Mode).
  • Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  • Keep the laptop's own adapter nearby for heavy workloads.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own BenQ GW2790QT? Check MacBook Pro 16-inch (M5 Pro, 2026)

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    Up to 2560×1440@75Hz

  • Required Cable

    USB-C DP Alt Mode

  • Power Delivery

    65W

Setup notes

  1. Plug the cable into a Thunderbolt 5 port on MacBook Pro 16-inch (M5 Pro, 2026) and into the BenQ GW2790QT's USB-C port (DisplayPort Alt Mode).
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  3. Keep the laptop's own adapter nearby for heavy workloads.

Community test reports

No approved reports yet. Queue one and it stays off the page until review.