Does NVIDIA GeForce RTX 5060 (reference spec) work with NZXT C850 Gold (ATX 3.1)?
Meets published power requirementsSystem-power recommendation and GPU connectors
Why this works
Yes. NZXT C850 Gold (ATX 3.1) is rated at 850 W. NVIDIA gives 550 W as the required system power for NVIDIA GeForce RTX 5060 (reference spec).
- The card needs 1 × 8-pin power connector, and this unit has 3 6+2-pin PCIe connectors.
Already own both? If your setup meets the requirements below, you can use it without buying a replacement.
Check requirements and buying optionsRequirements and limits
- What you need
- Check your setup
- The power cable that comes with the power supply.
- Power supply
- Check your setup
- 850 W, ATX 3.1
- The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
- This is NVIDIA's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
- Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
Where to buy
NZXT C850 Gold (ATX 3.1)
Before you buy
- The power cable that comes with the power supply.
- 850 W, ATX 3.1
- The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
- This is NVIDIA's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
- Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
We may earn a commission if you buy through a paid link.
Search Amazon for this model (paid link)
Amazon.com search results. Match the model and revision before buying.
Sources
Comparison of manufacturer specifications
Last checked
Power supply
850 W
Card maker asks for
550 W (required system power)
Card power connector
1 × 8-pin power connector
Setup notes
- Connect the power supply's cable to the card and push it in until it is fully seated.
- Check the case clearance and the motherboard slot separately.
Related pairings
More on NZXT C850 Gold (ATX 3.1)
- ASUS Prime GeForce RTX 5070 12GB GDDR7View answer
- ASUS TUF Gaming GeForce RTX 5070 Ti 16GB GDDR7View answer
- ASUS Prime Radeon RX 9070 XT 16GB GDDR6 OC EditionView answer
- AMD Radeon RX 9070 XT (reference spec)View answer
More with NVIDIA GeForce RTX 5060 (reference spec)
- ASUS ROG STRIX X870-A GAMING WIFIView answer
- NZXT C1000 Gold (ATX 3.1)View answer
- ASUS TUF GAMING B550-PLUSView answer
- MSI PRO Z790-A WIFIView answer
Community test reports
No approved reports yet. Queue one and it stays off the page until review.