Skip to content
CompatWiki

Does Dell UltraSharp U2723QE work with System76 Adder WS (addw5)?

Connect System76 Adder WS (addw5)'s USB-C (DisplayPort Alt Mode) port to the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.

  • Max Output

    Up to 3840×2160@60Hz

  • Required Cable

    USB-C DP Alt Mode

  • Power Delivery

    90W

  • Based on

    Manufacturer specs

Setup & gotchas

Cable
Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
OS
Linux.
  1. Plug the cable into a USB-C (DisplayPort Alt Mode) port on System76 Adder WS (addw5) and into the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode).
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  • If the picture is stuck at 30 Hz, switch the monitor's USB-C setting to prioritise resolution over USB data speed.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Sources

Last checked

Community test reports

No approved reports yet. Queue one and it stays off the page until review.