Skip to content
CompatWiki

Does Anker 555 USB-C Hub (8-in-1) work with System76 Darter Pro (darp11)?

Darter Pro Thunderbolt 4 is DisplayPort + USB-PD, so the 555’s HDMI 4K60 Alt Mode path is valid. Pass-through is 85W after the hub’s 15W draw; System76 wants 90W+ USB-C, so expect charge with less headroom than the 90W brick.

  • Max Output

    HDMI 4K60

  • Required Cable

    USB-C DP Alt Mode + HDMI 2.0

  • Power Delivery

    85W PD vs 90W+

  • Based on

    Manufacturer specs

Setup & gotchas

Cable
Host USB-C into the hub’s host plug. HDMI to the display. 100W PD charger + 100W USB-C cable into PD-IN for the 85W figure.
OS
Pop!_OS / Ubuntu.
  1. Thunderbolt 4 port (the PD-capable Type-C), not only the USB 3.2 Gen 2 Type-C.
  2. HDMI to the monitor. PD-IN from a 100W brick if you want pass-through.
  • USB-C ports on the hub do not output video.
  • 85W vs 90W+ spec.

Sources

Last checked

Where to buy

Anker 555 USB-C Hub (8-in-1)

Check these requirements first

Host USB-C into the hub’s host plug. HDMI to the display. 100W PD charger + 100W USB-C cable into PD-IN for the 85W figure.

Read the setup and limits

The link opens an Amazon search. Match the listing’s model and revision to the one shown here.

More on System76 Darter Pro (darp11)

More with Anker 555 USB-C Hub (8-in-1)

Community test reports

No approved reports yet. Queue one and it stays off the page until review.