Verdict
Partial
Does Dell UltraSharp U2723QE work with System76 Pangolin (pang15)?
Connect System76 Pangolin (pang15)'s USB4 port to the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.
- The monitor's native mode is 3840×2160 at 60 Hz.
- The monitor supplies up to 90 W. System76 Pangolin (pang15) ships with a 100 W adapter, so it charges below its full rate from the monitor.
Max Output
Up to 3840×2160@60Hz
Required Cable
USB-C DP Alt Mode
Power Delivery
90W
Based on
Manufacturer specs
Setup & gotchas
- Cable
- Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
- OS
- Linux.
- Plug the cable into a USB4 port on System76 Pangolin (pang15) and into the Dell UltraSharp U2723QE's USB-C port (DisplayPort Alt Mode).
- Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
- Keep the laptop's own adapter nearby for heavy workloads.
- 90 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
- If the picture is stuck at 30 Hz, switch the monitor's USB-C setting to prioritise resolution over USB data speed.
- Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
Sources
Last checked
Compatible alternatives
Plug & Play options on System76 Pangolin (pang15).
Related pairings
More on System76 Pangolin (pang15)
More with Dell UltraSharp U2723QE
- Framework Laptop 13 (Intel Core Ultra Series 1)Plug & Play
- Framework Laptop 13 (AMD Ryzen 7040 Series)Plug & Play
- MacBook Air (M1, 2020)Plug & Play
- MacBook Air (M2, 2022)Plug & Play
Community test reports
No approved reports yet. Queue one and it stays off the page until review.