Skip to content
CompatWiki
My gear

Does Focusrite Clarett 4Pre (Thunderbolt) work with ThinkPad X1 Carbon Gen 11?

Why this works

Focusrite Clarett Thunderbolt on Windows is Windows 10/11 64-bit Intel plus a Thunderbolt 3 port plus a TB3-to-TB2 adapter. Thunderbolt 4/5 PCs are not officially supported; Windows on ARM is unsupported. XPS 15 / ThinkPad X1 Carbon are Thunderbolt 4. Focusrite: Thunderbolt 4/5 PCs are not officially supported. Windows Clarett Thunderbolt wants a TB3 Intel PC plus a TB3-to-TB2 adapter.

Read the evidence (2)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Connection
Check your setup
Thunderbolt into a TB4/TB3 port (TB3-to-TB2 adapter as Focusrite documents). 12 V adapter required. Not USB.
Operating system
Check your setup
Windows 10/11 64-bit Intel. TB4/5 not officially supported.
Firmware
Check your setup
Focusrite Thunderbolt driver + TB3-to-TB2 adapter as documented.
  • Clarett 4Pre is original Thunderbolt-only Clarett (not USB, not Clarett+). 12 V DC adapter required. User guide: do not connect to anything but Thunderbolt. Distinct from focusrite-clarett-2pre-usb.
  • TB4/5 not officially supported (BSK risk).
  • Windows on ARM unsupported.
  • Phones, iPad, and SteamOS are not that Thunderbolt port.

Where to buy

Focusrite Clarett 4Pre (Thunderbolt)

Before you buy

  • Thunderbolt into a TB4/TB3 port (TB3-to-TB2 adapter as Focusrite documents). 12 V adapter required. Not USB.
  • Windows 10/11 64-bit Intel. TB4/5 not officially supported.
  • Focusrite Thunderbolt driver + TB3-to-TB2 adapter as documented.
  • Clarett 4Pre is original Thunderbolt-only Clarett (not USB, not Clarett+). 12 V DC adapter required. User guide: do not connect to anything but Thunderbolt. Distinct from focusrite-clarett-2pre-usb.
  • TB4/5 not officially supported (BSK risk).
  • Windows on ARM unsupported.
  • Phones, iPad, and SteamOS are not that Thunderbolt port.
  • Connect the 12 V adapter.
  • Thunderbolt into the laptop (TB3-to-TB2 adapter as required).
  • Install the Focusrite Thunderbolt driver.
  • Select Clarett 4Pre in the DAW.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own Focusrite Clarett 4Pre (Thunderbolt)? Check ThinkPad X1 Carbon Gen 11

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    None

  • Required Cable

    Thunderbolt + 12 V

  • Power Delivery

    12 V DC adapter

Setup notes

  1. Connect the 12 V adapter.
  2. Thunderbolt into the laptop (TB3-to-TB2 adapter as required).
  3. Install the Focusrite Thunderbolt driver.
  4. Select Clarett 4Pre in the DAW.

More on ThinkPad X1 Carbon Gen 11

More with Focusrite Clarett 4Pre (Thunderbolt)

Community test reports

No approved reports yet. Queue one and it stays off the page until review.