Does NVIDIA GeForce RTX 4060 (reference spec) work with Corsair RM650 (CP-9020280)?
Works with these requirementsSystem-power recommendation and GPU connectors
Why this works
Yes, with the card's included adapter. Corsair RM650 (CP-9020280) is rated at 650 W. NVIDIA gives 550 W as the required system power for NVIDIA GeForce RTX 4060 (reference spec).
- The card needs 1 × 16-pin power connector. This unit has no native 16-pin cable, so use the adapter that comes with the card: it takes 1 8-pin PCIe connector, and this unit has 2.
Already own both? If your setup meets the requirements below, you can use it without buying a replacement.
Check requirements and buying optionsRequirements and limits
- What you need
- Check your setup
- The adapter included with the card and 1 8-pin PCIe connector from the power supply.
- Power supply
- Check your setup
- 650 W, ATX 2.x
- The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
- This is NVIDIA's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
- Card maker: 1x PCIe 8-pin cables (adapter in box) OR 300 W or greater PCIe Gen 5 cable
- Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
Where to buy
NVIDIA GeForce RTX 4060 (reference spec)
Before you buy
- The adapter included with the card and 1 8-pin PCIe connector from the power supply.
- 650 W, ATX 2.x
- The card maker's wattage figure is for a whole system built around the card; a high-end processor leaves less headroom.
- This is NVIDIA's specification for the chip. Cards built on it by other makers can use a different power connector and state a different power supply figure; check the exact model.
- Card maker: 1x PCIe 8-pin cables (adapter in box) OR 300 W or greater PCIe Gen 5 cable
- Use cables supplied or explicitly approved for this exact PSU. Check the power needs of your complete system separately.
- The card needs 1 × 16-pin power connector. This unit has no native 16-pin cable, so use the adapter that comes with the card: it takes 1 8-pin PCIe connector, and this unit has 2.
- Connect every 8-pin lead of the adapter to its own PCIe connector, then the adapter to the card.
- Check the case clearance and the motherboard slot separately.
Sources
Comparison of manufacturer specifications
Last checked
Power supply
650 W
Card maker asks for
550 W (required system power)
Card power connector
1 × 16-pin power connector
Setup notes
- Connect every 8-pin lead of the adapter to its own PCIe connector, then the adapter to the card.
- Check the case clearance and the motherboard slot separately.
Related pairings
More on Corsair RM650 (CP-9020280)
- AMD Radeon RX 7600 (reference spec)View answer
- Intel Arc A770 Graphics (16GB) Limited EditionView answer
- AMD Radeon RX 9060 XT (16GB) (reference spec)View answer
- NVIDIA GeForce RTX 4060 Ti Founders EditionView answer
More with NVIDIA GeForce RTX 4060 (reference spec)
- Cooler Master MWE Gold 750 V2 Full ModularView answer
- MSI PRO Z690-A DDR4View answer
- NZXT C850 Gold CoreView answer
- ASUS ROG STRIX X870-A GAMING WIFIView answer
Community test reports
No approved reports yet. Queue one and it stays off the page until review.