Skip to content
CompatWiki

Does BenQ GW2790QT work with System76 Adder WS (addw5)?

Connect System76 Adder WS (addw5)'s USB-C (DisplayPort Alt Mode) port to the BenQ GW2790QT's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.

  • Max Output

    Up to 2560×1440@75Hz

  • Required Cable

    USB-C DP Alt Mode

  • Power Delivery

    65W

  • Based on

    Manufacturer specs

Setup & gotchas

Cable
Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
OS
Linux.
  1. Plug the cable into a USB-C (DisplayPort Alt Mode) port on System76 Adder WS (addw5) and into the BenQ GW2790QT's USB-C port (DisplayPort Alt Mode).
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Sources

Last checked

Where to buy

BenQ GW2790QT

Before you buy

Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.

The link opens an Amazon search. Match the listing’s model and revision to the one shown here.

More on System76 Adder WS (addw5)

More with BenQ GW2790QT

Community test reports

No approved reports yet. Queue one and it stays off the page until review.