Verdict
Plug & Play
Does Dell UltraSharp 27 Thunderbolt Hub Monitor (U2724DE) work with System76 Adder WS (addw5)?
Connect System76 Adder WS (addw5)'s USB-C (DisplayPort Alt Mode) port to the Dell UltraSharp 27 Thunderbolt Hub Monitor (U2724DE)'s Thunderbolt 4 upstream port: one cable carries the picture, charging and USB data.
- The monitor's native mode is 2560×1440 at 120 Hz.
- The monitor supplies up to 90 W to the laptop over the same cable.
Max Output
Up to 2560×1440@120Hz
Required Cable
USB-C DP Alt Mode
Power Delivery
90W
Based on
Manufacturer specs
Setup & gotchas
- Cable
- Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
- OS
- Linux.
- Plug the cable into a USB-C (DisplayPort Alt Mode) port on System76 Adder WS (addw5) and into the Dell UltraSharp 27 Thunderbolt Hub Monitor (U2724DE)'s Thunderbolt 4 upstream port.
- Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
- Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
Sources
Last checked
Related pairings
More on System76 Adder WS (addw5)
- Dell UltraSharp U2723QEPlug & Play
- LG 27UN850-WPlug & Play
- BenQ PD2725U (27-inch 4K Thunderbolt 3)Plug & Play
- ASUS ProArt Display PA279CRVPlug & Play
More with Dell UltraSharp 27 Thunderbolt Hub Monitor (U2724DE)
- Mac mini (2023, M2 Pro)Plug & Play
- Mac mini (2024, M4)Plug & Play
- Mac Studio (2025, M3 Ultra)Plug & Play
- Mac mini (2024, M4 Pro)Plug & Play
Community test reports
No approved reports yet. Queue one and it stays off the page until review.