Skip to content
CompatWiki

Does ASUS ProArt Display 5K PA27JCV work with System76 Pangolin (pang15)?

Connect System76 Pangolin (pang15)'s USB4 port to the ASUS ProArt Display 5K PA27JCV's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.

  • Max Output

    Up to 5120×2880@60Hz

  • Required Cable

    USB-C DP Alt Mode

  • Power Delivery

    96W

  • Based on

    Manufacturer specs

Setup & gotchas

Cable
Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
OS
Linux.
  1. Plug the cable into a USB4 port on System76 Pangolin (pang15) and into the ASUS ProArt Display 5K PA27JCV's USB-C port (DisplayPort Alt Mode).
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  3. Keep the laptop's own adapter nearby for heavy workloads.
  • 96 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • 5120×2880 at 60 Hz is more than 4K at 60 Hz. Whether you reach it also depends on the laptop's own external-display limit; check System76 Pangolin (pang15)'s display specification.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Sources

Last checked

Compatible alternatives

Plug & Play options on System76 Pangolin (pang15).

Where to buy

ASUS ProArt Display 5K PA27JCV

Check these requirements first

Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.

Read the setup and limits

The link opens an Amazon search. Match the listing’s model and revision to the one shown here.

More on System76 Pangolin (pang15)

More with ASUS ProArt Display 5K PA27JCV

Community test reports

No approved reports yet. Queue one and it stays off the page until review.