Verdict
Plug & Play
Does Dell UltraSharp 27 4K Thunderbolt Hub Monitor (U2725QE) work with System76 Pangolin (pang15)?
Connect System76 Pangolin (pang15)'s USB4 port to the Dell UltraSharp 27 4K Thunderbolt Hub Monitor (U2725QE)'s Thunderbolt 4 upstream port: one cable carries the picture, charging and USB data.
- The monitor's native mode is 3840×2160 at 120 Hz.
- The monitor supplies up to 140 W to laptops that accept USB PD Extended Power Range over USB-C, and at most 100 W to those that do not.
Max Output
Up to 3840×2160@120Hz
Required Cable
USB-C DP Alt Mode
Power Delivery
140W (EPR)
Based on
Manufacturer specs
Setup & gotchas
- Cable
- Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 240 W (EPR). A charge-only USB-C cable shows no picture.
- OS
- Linux.
- Plug the cable into a USB4 port on System76 Pangolin (pang15) and into the Dell UltraSharp 27 4K Thunderbolt Hub Monitor (U2725QE)'s Thunderbolt 4 upstream port.
- Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
- 3840×2160 at 120 Hz is more than 4K at 60 Hz. Whether you reach it also depends on the laptop's own external-display limit; check System76 Pangolin (pang15)'s display specification.
- Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
Sources
Last checked
Related pairings
More on System76 Pangolin (pang15)
- Dell UltraSharp U2723QEPartial
- LG 27UN850-WPartial
- BenQ PD2725U (27-inch 4K Thunderbolt 3)Partial
- ASUS ProArt Display PA279CRVPartial
More with Dell UltraSharp 27 4K Thunderbolt Hub Monitor (U2725QE)
- Mac mini (2024, M4)Plug & Play
- MacBook Air (M4, 2025)Plug & Play
- MacBook Pro 14-inch (M4, 2024)Plug & Play
- MacBook Pro 16-inch (M4 Max, 2024)Partial
Community test reports
No approved reports yet. Queue one and it stays off the page until review.