Skip to content
CompatWiki
My gear

Does Dell UltraSharp U3223QE work with System76 Pangolin (pang15)?

Why this works

Connect System76 Pangolin (pang15)'s USB4 port to the Dell UltraSharp U3223QE's USB-C port (DisplayPort Alt Mode): one cable carries the picture, charging and USB data.

  • The monitor's native mode is 3840×2160 at 60 Hz.
  • The monitor supplies up to 90 W. System76 Pangolin (pang15) ships with a 100 W adapter, so it charges below its full rate from the monitor.
Read the evidence (3)

Already own both? If your setup meets the requirements below, you can use it without buying a replacement.

Check requirements and buying options

Requirements and limits

Connection
Check your setup
Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
Operating system
Check your setup
Linux.
  • 90 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • If the picture is stuck at 30 Hz, switch the monitor's USB-C setting to prioritise resolution over USB data speed.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.

Where to buy

System76 Pangolin (pang15)

Before you buy

  • Full-featured USB-C cable that carries video (DisplayPort Alt Mode) rated for 5 A / 100 W. A charge-only USB-C cable shows no picture.
  • Linux.
  • 90 W against 100 W is the limit of this pairing, not the picture. Use the laptop's own adapter when you need full power.
  • If the picture is stuck at 30 Hz, switch the monitor's USB-C setting to prioritise resolution over USB data speed.
  • Use the monitor port marked for video/upstream. A data-only USB-C port on the monitor shows no picture.
  • The monitor's native mode is 3840×2160 at 60 Hz.
  • The monitor supplies up to 90 W. System76 Pangolin (pang15) ships with a 100 W adapter, so it charges below its full rate from the monitor.
  • Plug the cable into a USB4 port on System76 Pangolin (pang15) and into the Dell UltraSharp U3223QE's USB-C port (DisplayPort Alt Mode).
  • Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  • Keep the laptop's own adapter nearby for heavy workloads.

We may earn a commission if you buy through a paid link.

Search Amazon for this model (paid link)

Amazon.com search results. Match the model and revision before buying.

Already own System76 Pangolin (pang15)? Check Dell UltraSharp U3223QE

Sources

Manufacturer or platform documentation

Last checked

  • Max Output

    Up to 3840×2160@60Hz

  • Required Cable

    USB-C DP Alt Mode

  • Power Delivery

    90W

Setup notes

  1. Plug the cable into a USB4 port on System76 Pangolin (pang15) and into the Dell UltraSharp U3223QE's USB-C port (DisplayPort Alt Mode).
  2. Select the USB-C / Thunderbolt input on the monitor if it does not switch on its own.
  3. Keep the laptop's own adapter nearby for heavy workloads.

More on System76 Pangolin (pang15)

More with Dell UltraSharp U3223QE

Community test reports

No approved reports yet. Queue one and it stays off the page until review.